UMAX e3000 Merkblatt

STEP 1 
Connect the e3000

 

Before you install the Bullet Router, please ask your DSL/Cable 
Modem Service Provider the 
following questions: 

• 

Do I have a PPPoE (where you must provide a user name and 
password to get connected), Dynamic IP, PPtP or a Fixed 
IP Account? 

• 

For PPPoE users, what are my user name and password? 

• 

For Fixed IP and PPtP Account Users, what are my IP 
Address, Subnet Mask, Default Gateway and Domain Name 
Servers? 

Step 1. Before you start, please turn off the power to the DSL/Cable 
Modem, Bullet Router and your PC. 
 
Step 2. Locate the network cable connecting your PC's network card 
to the DSL/Cable 
Modem. 
 
Step 3. Remove the cable coming from the PC to the DSL/Cable Modem 
and insert into 
the e3000's connector labeled "1" while remaining connected to the 
PC. 
 
Step 4. Using the cable shipped with the Bullet Router, connect the 
Bullet Router to the DSL or Cable Modem. Insert one end of the cable 
to the Bullet Router's connector labeled "WAN" and other end to the 
DSL/Cable Modem, from where you just remove a cable (Step 3.) 
 
Step 5. Make sure the Bullet Router and the DSL/Cable Modem are on, 
and then reboot your PC.