multicoat kretekoter Benutzerhandbuch

The MULTICOAT KRETE KOTE 2000 System

is a super bonding, flexible Synthetic Resin

modified cementitious coating which forms a

cost-effective, durable, anti-skid, weather and

chemical resistant surface over properly pre-

pared substrates. It can be applied to  drive-

ways, walkways, steps, decks, building,

bridges, etc.

Bonds Securely to Structurally Sound 

Concrete

Easy to Apply and Cost Effective

Fast Curing Time - Short Down Time

Resistant to Moisture 

Penetration, Salt Spray and Most
Chemicals

High Flexural Strength - Will Withstand 

Moderate Flexing, Unlike Most Concrete 

Repair Coatings

High Impact Resistance

Resistant to Freeze-Thaw Conditions

Multiple Decorative Anti-Skid Finishes and 

Designs

Mulitple Color Selections

Water Base - Environmentally Safe to Use 

and Apply

SEE TEST DATA

Substrate must be structurally sound, free

from grease, oil, paint, dirt, dust, sealers,

laitence, curing compounds and other foreign

materials which may prevent proper bonding.

Cracks and imperfections must be repaired

and 

proper expansion joints installed;

cleaned and caulked if already existing.

MULTICOAT KRETE KOTE and TOP COAT 2000

are furnished in 65 lb. bags and field mixed with

potable (clean) water in the approximate amount

of 1

3

⁄

4

-2 gallons per bag, preferably with a

special MULTICOAT Mixing Paddle. Mix

vigorously to disperse all lumps and to

thoroughly wet all particles,. Suggest 1-1

1

⁄

2

min-

utes after all dry material added.  Use margin

trowel to clear vessel sides. Adjust to desired

consistency by addition of dry material or 

amount of water. For best results let Krete Kote or

Top Coat stand in bucket for 3-5 minutes, then

add a small amount of water and rebreak materi-

al. This will give additional pot life.

Mixed KRETE KOTE and TOP COAT 2000 are

applied by roller, trowel, or squeegie in one coat

plus texture coat, or two or more coats plus tex-

ture coat, depending on surface condition.

KR

ETE

KO

TE

SY

STE

M

SURFACE PREPARATION

CRACK REPAIR WITH SPEED BOND (SEE CRACK

REPAIR SYSTEM).

BASE COAT APPLICATION – TROWELED

FINISH COAT – TEXTURED IF DESIRED
HOPPER GUN – KNOCK DOWN

ACRATHANE COLORSEAL