Panasonic TX32DW334 Bedienungsanleitung

English   - 4 -

Regular care:
Gently wipe the surface of the display panel, cabinet, 

or pedestal by using a soft cloth to remove dirt or 

fingerprints.
For stubborn dirt:
1.  First clean the dust from the surface.
2.  Dampen a soft cloth with clean water or diluted 

neutral detergent (1 part detergent to 100 parts 

water).

3.  Wring out the cloth firmly. (Please note, do not 

let liquid enter the TV inside as it may lead to 

product failure.)

4.  Carefully wipe moisten and wipe away the 

stubborn dirt.

5.  Finally, wipe away all the moisture.
Caution
Do not use a hard cloth or rub the surface too hard, 

otherwise this may cause scratches on the surface.
• Take care not to subject the surfaces to insect 

repellent, solvent, thinner or other volatile 

substances. This may degrade surface quality or 

cause peeling of the paint.

• The surface of the display panel is specially treated 

and may be easily damaged. Take care not to tap 

or scratch the surface with your fingernail or other 

hard objects.

• Do not allow the cabinet and pedestal to make 

contact with a rubber or PVC substance for a long 

time. This may degrade surface quality.

Wipe the mains plug with a dry cloth at regular 

intervals.
Moisture and dust may cause fire or electrical shock.

Preparations
Take out the pedestal(s) and the TV from the packing 

case and put the TV onto a work table with the screen 

panel down on the clean and soft cloth (blanket, etc.)
• Use a flat and firm table bigger than the TV.
• Do not hold the screen panel part.
• Make sure not to scratch or break the TV.
Assembling the pedestal
1.  Place the stand(s) on the stand mounting 

pattern(s) on the rear side of the TV. 

2.  Insert the screws 

(M4 x 12)

 provided and tighten 

them gently until the stand is properly fitted.

Removing the pedestal from the TV
Be sure to remove the pedestal in the following way 

when using the wall-hanging bracket or repacking 

the TV.
• Put the TV onto a work table with the screen panel 

down on the clean and soft cloth. Leave the stand(s) 

protruding over the edge of the surface.

• Unsrew the screws that fixing the stand(s).
• Remove the stand(s).