Panasonic ESST3N Bedienungsanleitung
16
►Unlocking the power switch
1. Press
for more than
2 seconds.
• The switch lock lamp ( )
will turn off.
2. Once the shaver starts
operating, release
.
• The power switch cannot be unlocked when the shaver is set
into the charging stand and the charging stand is turned on.
• The power switch is locked when the switch lock lamp ( )
blinks for 5 seconds and the shaver does not operate even
though the power switch is pressed.
though the power switch is pressed.
Cleaning the shaver
We recommend cleaning the shaver after each use.
1. Turn the shaver off and disconnect the AC
adaptor.
2. Apply some hand soap and some water to
the system outer foil [A1].
• Close the cleaning shutter.
3. Turn the shaver on.
▼
There are two ways to clean the shaver, depending on
the actual dirt level.
▼
▼
▼
▼
To remove light dirt
To remove heavy dirt
4. Slide the cleaning shutter
[A4] until it clicks.
5. Clean the outer foil section
[A] with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
several times to remove
the water.
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil
section [A] and turn the
shaver on.
shaver on.
6. Clean the shaver and the
outer foil section [A]
with running water.
with running water.
• Rinse with water and
shake up and down
several times to remove
the water.
several times to remove
the water.
▼
▼