Panasonic ESST3N Mode D’Emploi

►Unlocking the power switch

1. Press

for more than

2 seconds.

• The switch lock lamp ( )

will turn off.

2. Once the shaver starts

operating, release

• The power switch cannot be unlocked when the shaver is set

into the charging stand and the charging stand is turned on.

• The power switch is locked when the switch lock lamp ( )

blinks for 5 seconds and the shaver does not operate even
though the power switch is pressed.

Cleaning the shaver

We recommend cleaning the shaver after each use.

1. Turn the shaver off and disconnect the AC

adaptor.

2. Apply some hand soap and some water to

the system outer foil [A1].

• Close the cleaning shutter.

3. Turn the shaver on.

▼

There are two ways to clean the shaver, depending on

the actual dirt level.

▼

To remove light dirt

To remove heavy dirt

4. Slide the cleaning shutter

[A4] until it clicks.

5. Clean the outer foil section

[A] with running water.

6. Turn the shaver off.

• Rinse with water and

shake up and down
several times to remove
the water.

4. Turn the shaver off after

10 – 20 seconds.

5. Remove the outer foil

section [A] and turn the
shaver on.

6. Clean the shaver and the

outer foil section [A]
with running water.

• Rinse with water and

shake up and down
several times to remove
the water.

▼