Panasonic KXTG8424E Bedienungsanleitung

Seite von 60
Useful Information
50
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s 
AC adaptor and turn on the handset.
General use
Problem
Cause/solution
The handset does not 
automatically turn on after 
installing/replacing batteries.
L
The battery is empty or too weak to turn on the 
power. Place the handset on the base unit or 
charger, and let it charge. 
The unit does not work.
L
Make sure the batteries are installed correctly 
(page 9).
L
Fully charge the batteries (page 9).
L
Check the connections (page 9).
L
Unplug the base unit’s AC adaptor to reset the 
unit and turn off the handset. Reconnect the 
adaptor, turn on the handset and try again.
L
The handset has not been registered to the 
base unit. Register the handset (page 28).
The handset display is blank or 
dark.
L
The handset is in screen saver mode (page 
13).
 Activate the handset display again by: 
– pushing the joystick left {<} or right {>} 
when on a call.
– pressing {ih} at all other times.
L
“LCD in charging” is set to “Off” while on 
charge. Change the setting (page 22).
L
The handset is not turned on. Turn the power 
on (page 13).
TG8421E(e).book  Page 50  Tuesday, December 16, 2008  8:03 AM