Panasonic KXTG8424E Bedienungsanleitung
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Useful Information
51
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programmable settings
I cannot hear a dial tone.
L
Make sure that you are using the supplied
telephone line cord. Your old telephone line
cord may have a different wiring configuration.
telephone line cord. Your old telephone line
cord may have a different wiring configuration.
L
The base unit’s AC adaptor or telephone line
cord is not connected. Check the connections.
cord is not connected. Check the connections.
L
If you are using a splitter to connect the unit,
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
L
Disconnect the base unit from the telephone
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
I do not know how to erase y
(Missed call) from the display.
(Missed call) from the display.
L
There are unviewed missed calls remaining.
View them and erase y in the following way.
View them and erase y in the following way.
1
1 (centre of joystick) i j i M
2
Push the joystick down to search from the
most recent call, or push the joystick up to
search from the oldest call.
most recent call, or push the joystick up to
search from the oldest call.
Problem
Cause/solution
I have changed the display
language to a language I
cannot read.
language to a language I
cannot read.
L
Change the display language.
{ih}
{ih}
i
1 i N i M i Push the
joystick down 2 times. i M i Push the
joystick down 5 times. i M i
{V}
joystick down 5 times. i M i
{V}
/{^}: Select your desired language. i
M
i {ih}
While programming, the
handset starts to ring.
handset starts to ring.
L
A call is being received. Answer the call and
start again after hanging up.
start again after hanging up.
While programming, the
display returns to standby
mode.
display returns to standby
mode.
L
A call matching an entry in the call barred list
is being received. Wait and try again later.
is being received. Wait and try again later.
Problem
Cause/solution
TG8421E(e).book Page 51 Tuesday, December 16, 2008 8:03 AM