Panasonic KX-MC6020 Bedienungsanleitung

Seite von 120
2. Preparation
17
For assistance, please visit http://www.panasonic.com/help
2 Preparation
2For assistance, please visit http://www.panasonic.com/help
Connections and Setup
2.1 Connections
Caution:
L
When you operate this product, the power outlet 
should be near the product and easily 
accessible.
Note:
L
If any other device is connected to the same 
telephone line, this unit may disturb the network 
condition of the device.
Using surge protectors
L
The warranty does not cover damage due to power 
line surges or lightning. For additional protection, we 
recommend using surge protectors (
j).
If the unit shares a single telephone line with a DSL 
service
Fax transmission/reception may be disturbed, noise 
interference may be heard during telephone 
conversations, or Caller ID (page 53) may not function 
properly. A filter to prevent this is provided by your 
provider. Please attach the filter (
k) to the telephone 
line cord of the unit.
Using network router/network hub
L
We recommend using network routers/network hubs 
(
6) under secure network environments. Consult 
your network administrator for firewall settings, etc.
L
The warranty does not cover damage due to security 
problems or any disadvantages relating to it. 
1 Power cord
L
Connect to a power outlet
(120 V, 60 Hz).
2 Telephone line cord
L
Connect to a single telephone line jack (RJ11).
3 [EXT] jack
L
You can connect an answering machine or an 
extension telephone. Remove the stopper if 
attached.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L
Also connect networked computers.
7 LAN cable (not supplied)
L
To assure continued emission limit compliance, 
use only shielded LAN cable (category 5 straight 
cable).
8 Handset unit (optional) connection jack
L
You can connect the optional handset unit (page 
77
). Remove the cover if attached.
9 Automatic duplex unit (optional) connector
1
5
3
6
9
j
2
4
7
8
IMPORTANT NOTICE FOR THE USB 
CONNECTION
L
DO NOT CONNECT THE UNIT AND A 
COMPUTER WITH USB CABLE UNTIL 
PROMPTED BY THE MULTI-FUNCTION 
STATION (page 24).
k