Panasonic KX-MC6020 Bedienungsanleitung
1. Introduction and Installation
12
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
1.7.2 Using the automatic document feeder
1
Insert the document (up to 50 pages) FACE UP into
the feeder until a single beep is heard.
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit
the actual size of the document.
Help
1.8 Help function
The unit contains helpful information, which can be
printed for reference.
–
printed for reference.
–
“
BASIC SETTINGS”
–
“
FEATURE LIST”
–
“
DIRECTORY”
–
“
FAX SND/RCV”
–
“
COPIER”
–
“
Q and A”
–
“
ERRORS”
–
“
REPORTS”
–
“
CALLER ID”
1
Press {Menu} repeatedly to display “
HELP”.
2
Press {<} or {>} repeatedly to display the desired
item. i {Set}
item. i {Set}
3
Press {Menu} to exit.
Volume
1.9 Adjusting the volume
Important:
L
Before adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
Ringer volume
While the unit is idle, press {V} or {^}.
While the unit is idle, press {V} or {^}.
L
The ringer volume can only be adjusted if there are
no documents in the document entrance.
no documents in the document entrance.
To turn the ringer OFF
Press {V} repeatedly to display “
Press {V} repeatedly to display “
RINGER OFF= OK?”.
i {Set}
L
The unit will not ring.
L
To turn the ringer back ON, press {^}.
Monitor volume
While using the monitor, press {V} or {^}.
While using the monitor, press {V} or {^}.
Initial Programming
1.10 Date and time
1
{
Menu} i {#}{1}{0}{1} i {Set}
M:
|
01/D:01/Y:08
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2008 10:15 PM (12 hour
clock format)
selecting 2 digits for each.
Example: August 10, 2008 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{8} {1}{0} {1}{5}.
M:
|
08/D:10/Y:08
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
Set}
4
Press {Menu} to exit.
1.11 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
so that it appears on the top of each page sent.
1
{
Menu} i {#}{1}{0}{2} i {Set}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial
keypad. i {Set}
keypad. i {Set}
3
Press {Menu} to exit.
1.12 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
Menu} i {#}{1}{0}{3} i {Set}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {Flash}.
L
To erase a number, press {Stop}.
3
{
Set}
4
Press {Menu} to exit.
1
MC6020-PNQW1048ZA-QRG-en.book Page 12 Tuesday, May 20, 2008 2:09 PM