Panasonic CZCSWKC2 Bedienungsanleitung

· Set T. 

     

:Displays the set temperature. The range of temperatures that can be  

     

 set varies, depending on the connected air conditioner model and the  

     

 operation mode.

· Room T.     

 

:Displays room temperatures.

· Fan 

   

 

:Displays fan speeds.

 

 

 

 Automatic (automatic fan speed), High, Mid., Low (Displayed as - - if  

 

 

 the model concerned cannot display this information.)

· Flap  

 

 

:Displays the directions of flaps.

 

 

 

 Swing, F1 - F5 (warm, fan: F1 - F5, for cooling: F1 - F3)

 

 

 

 Displayed as - - if the model concerned cannot display this information.

· Prhbt   

 

 

:Central control (local control prohibited)

 

 

 

 Individual (no prohibition), prohibit 1=prohibit 7 (Settings can be made  

 

 

 for various types of central control (Prohibition))

· Alarm   

 

 

:Displays alarm codes if an alarm has been issued by an indoor unit.

 

 

 

 Displays Maintenance if “Register maintenance information” applies.

· R/C  

 

 

:Displays “Yes” for indoor units that have remote control units

· O/D unit 

   

 

:Displays outdoor unit codes.

· I/D unit 

   

 

:Displays indoor unit codes.

*   If it is not possible to communicate with the adapter, or if the model used cannot 

display the content, the column will display “- -”.

*   Use the Maintenance screens to assign indoor unit points to the screen.

The names of indoor units which are unconnected are displayed in red. Their operating status 
cannot be checked.

First, select the floor and area.
If the floor and area is “All Floor”, all registered indoor units are 
displayed. Click on the 

 button on the right edge of the floor 

selection list to display a list of registered floors and areas. From the 
list, select the floor or area to monitor.
A list of indoor units registered within that floor and area is displayed.

When an alarm is issued for an indoor unit, the error code is displayed in the Alarm 
column.
Nothing is displayed if there are no current alarms.

*  The alarm display is automatically removed if the alarm has been restored.