Panasonic CZCSWKC2 操作ガイド
· Set T.
:Displays the set temperature. The range of temperatures that can be
set varies, depending on the connected air conditioner model and the
operation mode.
· Room T.
:Displays room temperatures.
· Fan
:Displays fan speeds.
Automatic (automatic fan speed), High, Mid., Low (Displayed as - - if
the model concerned cannot display this information.)
· Flap
:Displays the directions of flaps.
Swing, F1 - F5 (warm, fan: F1 - F5, for cooling: F1 - F3)
Displayed as - - if the model concerned cannot display this information.
· Prhbt
:Central control (local control prohibited)
Individual (no prohibition), prohibit 1=prohibit 7 (Settings can be made
for various types of central control (Prohibition))
· Alarm
:Displays alarm codes if an alarm has been issued by an indoor unit.
Displays Maintenance if “Register maintenance information” applies.
· R/C
:Displays “Yes” for indoor units that have remote control units
· O/D unit
:Displays outdoor unit codes.
· I/D unit
:Displays indoor unit codes.
* If it is not possible to communicate with the adapter, or if the model used cannot
display the content, the column will display “- -”.
* Use the Maintenance screens to assign indoor unit points to the screen.
The names of indoor units which are unconnected are displayed in red. Their operating status
cannot be checked.
cannot be checked.
4-7-1.
Display method
4-7-1-1.
Selecting displayed floor and area
First, select the floor and area.
If the floor and area is “All Floor”, all registered indoor units are
displayed. Click on the
If the floor and area is “All Floor”, all registered indoor units are
displayed. Click on the
button on the right edge of the floor
selection list to display a list of registered floors and areas. From the
list, select the floor or area to monitor.
A list of indoor units registered within that floor and area is displayed.
list, select the floor or area to monitor.
A list of indoor units registered within that floor and area is displayed.
4-7-1-2.
Displaying alarms
When an alarm is issued for an indoor unit, the error code is displayed in the Alarm
column.
Nothing is displayed if there are no current alarms.
column.
Nothing is displayed if there are no current alarms.
* The alarm display is automatically removed if the alarm has been restored.