Panasonic CZCSWKC2 Bedienungsanleitung
4-16-1. Display method
4-16-1-1.
Selecting displayed floor and area
If the floor and area is “All”, all registered indoor units are
displayed. Click on the
displayed. Click on the
button on the right edge of the
floor selection list to display a list of registered floors and
areas.
From the list, select the floor or area to monitor. A list
of indoor units registered within that floor and area is
displayed.
areas.
From the list, select the floor or area to monitor. A list
of indoor units registered within that floor and area is
displayed.
4-16-2. Maintenance settings
4-16-2-1.
Maintenance settings
Click on the register maintenance information column for devices that are not set
for maintenance. They will then have a check mark in the register maintenance
information column, so monitoring and control will not be applied, even if an alarm
occurs. The buzzer will not sound if an alarm occurs.
for maintenance. They will then have a check mark in the register maintenance
information column, so monitoring and control will not be applied, even if an alarm
occurs. The buzzer will not sound if an alarm occurs.
4-16-2-2.
Cancel maintenance
Click on the register maintenance information column for devices that are set for
maintenance. The check mark will be removed from the register maintenance
information column, and they will revert to normal monitoring. All operations will be
enabled.
maintenance. The check mark will be removed from the register maintenance
information column, and they will revert to normal monitoring. All operations will be
enabled.
4-16-2-3.
Registering changed data
button to register changes. All changed data is registered.
4-16-2-4.
Deleting settings
Click on the
button to revert to the previously registered state.
4-16-3. Change confirmation
If you have changed the maintenance settings and attempt to switch to another
screen without first saving the changes, the change confirmation message is
displayed.
screen without first saving the changes, the change confirmation message is
displayed.
Click on the
button to discard changes and switch screens.
Click on the
button to continue using this screen.