Panasonic KXTG2521FX Bedienungsanleitung

37

*1 KX-TG2512/KX-TG2513
*2 KX-TG2521

w

 is flashing.

L

The handset is too far from the base unit. 
Move closer.

L

The base unit’s AC adaptor is not properly 
connected. Reconnect AC adaptor to the 
base unit.

L

The handset is not registered to the base unit. 
Register it (page 40).

L

Activating one touch eco mode reduces the 
range of the base unit in standby mode. If 
required, turn eco mode off (page 14).

Noise is heard, sound cuts in 
and out.

L

You are using the handset or base unit in an 
area with high electrical interference. Re-
position the base unit and use the handset 
away from sources of interference.

L

Move closer to the base unit.

L

If you use a DSL/ADSL service, we 
recommend connecting a DSL/ADSL filter 
between the base unit and the telephone line 
jack. Contact your DSL/ADSL provider for 
details.

L

Unplug the base unit’s AC adaptor to reset the 
unit and turn off the handset. Reconnect the 
adaptor, turn on the handset and try again.

The handset does not ring.

L

The ringer volume is turned off. Adjust ringer 
volume (page 20).

I cannot make a call.

L

The dialling mode may be set incorrectly. 
Change the setting (page 14).

L

The handset is too far from the base unit. 
Move closer and try again.

L

Another unit is in use. Wait and try again 
later.

L

Answering system is being used.

 Wait and 

try again later.

TG2511_21FX(e).book  Page 37  Tuesday, February 10, 2015  10:49 AM