Panasonic SDR-S100 Bedienungsanleitung
18
VQT0T60
When this unit is purchased, the battery is not charged. Charge the battery before using this unit.
¬Set the power switch to [OFF]. (P19)
Connect the AC adaptor (supplied)
A
to this unit and the AC outlet.
1Open this unit’s terminal cover.
2Connect the AC adaptor to this unit’s DC
2Connect the AC adaptor to this unit’s DC
input terminal [DC IN 9.3V].
3Connect the AC mains lead to the AC
adaptor, then the AC outlet.
The status indicator
B starts blinking in red at
intervals of about 2 seconds to signal that
charging has commenced. Charging is
completed when the lamp goes off.
≥ If the status indicator blinks faster or slower,
charging has commenced. Charging is
completed when the lamp goes off.
≥ If the status indicator blinks faster or slower,
refer to page 107.
∫ Connecting to the AC outlet
If you turn on this unit while charging the battery using the AC adaptor, you can use the
power supplied from the AC outlet to power the unit for use. (While it is in use, the
battery will not be charged.)
power supplied from the AC outlet to power the unit for use. (While it is in use, the
battery will not be charged.)
∫ Charging time and recordable time
The times shown in the table below show the times at a temperature of 25
oC and a
humidity of 60%. This is just a guide. If the temperature is higher or lower than the
specified value, the charging time will become longer.
≥ The intermittent recordable time refers to recordable time when the recording and
specified value, the charging time will become longer.
≥ The intermittent recordable time refers to recordable time when the recording and
stopping operations are repeated. In reality, it may be shorter than this.
≥ “1h 30 min” indicates 1 hour 30 minutes.
Charging the Battery
DC IN 9.3V
1
2
3
B
A
The AC mains lead is for use with this unit only.
Do not use it with other devices or use the AC
mains lead for other devices with this unit.
Do not use it with other devices or use the AC
mains lead for other devices with this unit.
Battery model
number
Voltage/
capacity
Charging time
Maximum
continuously
recordable time
Intermittent
recordable time
Supplied battery/
CGA-S303
(optional)
7.4 V/
760 mAh
Approx.
1 h 30 min
Approx.
1 h 20 min
Approx.
45 min
≥ The recordable time will become shorter
when you use this unit with the LCD monitor lit
up by pressing the [POWER LCD] button.
up by pressing the [POWER LCD] button.
≥ The batteries heat up after use or charging.
The unit and the SD card also heat up during
use. This is not a malfunction.
use. This is not a malfunction.
≥ Along with the reduction of the battery
capacity, the display will change:
#
#
#
#
. If the battery discharges,
then
(
) will flash.
VQT0T60_EB.book 18 ページ ２００５年８月２４日 水曜日 午後１時５７分