Panasonic S-ICX Handbuch

Section 521

Built-In ACD Supervisor Guide

S-ICX-10-521 (ACD 3.0)

S-ICX (International) issued February 2000

9

For details on settings see, “Basic Service Flow” .

The following describes the operation in each of the processes.

This command resets the current setting of displayed program lines. Edit is 
repeated from the specified program line through to the currently registered 
final program line (excluding the END/DISC line).

The following screen display shows an example of selection and setting of the 
SEARCH command.

1. Press 

soft keys (1, 2, 3, 6 or 7) for the command to be set, and 

press the HOLD key.
Example: Press soft key 3 to select SEARCH.

2.  Set parameter 1, and press the HOLD key.

Example: Press key 2 to set group 2.

3.  Set parameter 2, and press the HOLD key.

Example: Press keys 0, 1 and 5 to set the Search Timer to 15.

6

RET

Program Line 
Number Set-
ting 1 to 20 
(max. 20 
lines) 
(must be set)

Count Set-
ting 1 to 255 
(times) 
(must be set)

Return
• Repeats the program from the line number speci-

fied in parameter 1 up to this line for the count 
specified in parameter 2.

→

→

→