Panasonic S-ICX Handbuch
Section 521
Built-In ACD Supervisor Guide
S-ICX-5.0-521 (ACD 4.0)
S-ICX (International) issued October 2000
1
General System Information
Configuration
The Built-In ACD System is a simple ACD system that is installed in the
S-ICX System. The built-In ACD system is composed of the two circuit
cards; the ACD card and the VPU/4 card.
S-ICX System. The built-In ACD system is composed of the two circuit
cards; the ACD card and the VPU/4 card.
The system configuration is shown below. Using RS-232C port allows MIS
(Management Information System) reports to be output to a printer or PC but
not to the both simultaneously.
(Management Information System) reports to be output to a printer or PC but
not to the both simultaneously.
The S-ICX System configured for a maximum of 96 ports can support one
Built-In ACD system.
Built-In ACD system.
Figure 1. ACD Configuration (96 port cabinet shown)
Note: Standard RS232C cables cannot be used for connection. Use the
special cable included with the ACD card. For PC/printer connecting
conditions, see the ACD installation section.
special cable included with the ACD card. For PC/printer connecting
conditions, see the ACD installation section.