Panduit Universal Network Zone System Техническое Руководство
www.panduit.com /networkzone
S P E C I F I C A T I O N S H E E T
a p p l i c a t i o n s
The Panduit Universal Network Zone System
is designed to rapidly deploy an industrial Ethernet
network between the enterprise and plant floor.
Copper/fiber connectivity and power features
minimize engineering and installation time resulting in
faster implementation. The Universal Network Zone
System provides usability similar to IT switches for
industrial switches on the plant floor. This ensures
that management and control of the network does
not get in the way of making the most effective use of
available network data.
With UL Type 4/12/4X, IP66 rating and CE, the
enclosures provide reliability and high performance,
as an integral component of the end-to-end solution
for Industrial Networks.
s p e c i f i c a t i o n s
The universal network zone system shall include copper/fiber uplinks
and downlinks optimized for industrial Ethernet switches. System shall
incorporate redundant power supplies and optional UPS and PoE
power supply. The enclosure shall be UL 508A, UL Type 4/12/4X,
IP66 rated and CE. A removable, pre-engineered back plate with DIN
rails shall be incorporated in the enclosure. Pre-installed accessory
side panels, fiber slack spool, and L rings shall be included for cable
management. The door shall be secured with 3mm double bit or slotted
latch drive feature. The door shall hinge on the right or left. Class 2 power
circuits shall be pre-wired, labeled, and tested. A barrier shall be present
to isolate IT personnel from high voltage power circuit.
Universal Network Zone System
Universal Network Zone System
See part number table on pages 2-3
Related Products
PanZone
®
NEMA 4X Rated
Compression Fittings
Cable diameters
0.115" – 0.250":
0.115" – 0.250":
PZNF1
Cable diameters
0.230" – 0.395":
0.230" – 0.395":
PZNF2
Cable diameters
0.170" – 0.450":
0.170" – 0.450":
PZNF3
Drain kit:
PZNDVK
IndustrialNet
™
TX6
™
Connectors
Category 6
UTP bulkhead
connector:
UTP bulkhead
connector:
IAEBH6
Category 6
STP bulkhead
connector:
STP bulkhead
connector:
IAEBH6S
Fiber Uplink Accessories
Surface mount
fiber box:
fiber box:
CBXF6BL-AY
LC OptiCam
®
connector:
FLCDMCXAQY
LC connector
module:
module:
CMDSAQLCBL
LC OM3 patch cord: F92ERLNLNSNM001
Opti-Core
Opti-Core
®
Interlocking
Armored Cable:
FOPRX12Y
DIN Rail Patching Accessories
Mini-Com
®
Copper
8-Port DIN Rail
Patch Panel:
Patch Panel:
CDPP8RG
Mini-Com
®
Fiber
8-Port DIN Rail
Patch Panel:
Patch Panel:
FDME8RG
Mini-Com
®
Single
Port DIN Rail
Mount Adapter:
Mount Adapter:
CADIN1IG^
Copper Connectivity
UTP patch cord:
UTPSP3Y
UTP
Mini-Com
Mini-Com
®
Jack:
CJ688TGIW
STP patch cord:
STP6X3IG
STP
Mini-Com
Mini-Com
®
Jack:
CJS688TGY
TX6500
™
Copper Cable
Category 6, UTP: PUR6504BU-UY
Suggested industrial Switches
Cisco^^ IE2000, IE3000, IE4000 series
switch models
Allen-Bradley* Stratix** 5400, 5700, 8000, 8300
series switch models
switch models
Allen-Bradley* Stratix** 5400, 5700, 8000, 8300
series switch models
^For standard colors other than International
Gray, replace IG in part number with
BL (Black), EI (Electric Ivory), IW (Off White), or
WH (White).
^^Cisco is a registered trademark of Cisco
Systems, Inc. and/or its affiliates in the United
States and certain other countries.
*Rockwell Automation and Allen-Bradley are
registered by Rockwell Automation in the Patent
and Trademark Office of the United States.
**Stratix is a trademark of Rockwell Automation.
t e c h n i c a l i n f o r m a t i o n
Standards:
UL 508A Standard for Industrial Control Panels, UL Type 4/12 or 4X,
IP66 Rated, CE
IP66 Rated, CE
Dimensions:
Z23U: 36.0"H x 24.0"W x 11.7"D (914mm x 610mm x 297mm)
Z22U: 24.0"H x 24.0"W x 11.7"D (610mm x 610mm x 297mm)
Z22U: 24.0"H x 24.0"W x 11.7"D (610mm x 610mm x 297mm)
Color and material:
Enclosures: Gray, 14 gauge cold roll steel or 316 stainless steel
Back panels: 14 gauge galvannealed steel or 304 stainless steel
Back panels: 14 gauge galvannealed steel or 304 stainless steel
Thermal analysis:
Validated to 40°C ambient outside of enclosure or 60°C maximum within
enclosure at up to 95% (non-condensing) humidity
enclosure at up to 95% (non-condensing) humidity
Installation:
Wall mount with optional outside-mount flange
k e y f e a t u r e s a n d b e n e f i t s
Switch ready solution:
Reduces time required for planning, designing, procurement, and
installation, resulting in simpler specification and up to 75%
faster implementation
installation, resulting in simpler specification and up to 75%
faster implementation
Universal design:
Works with most DIN mount industrial Ethernet switches, providing
design flexibility
design flexibility
Designed to accept
customer supplied
industrial switches:
customer supplied
industrial switches:
Offer management and diagnostics from within IT and controls
environments to optimize network traffic
environments to optimize network traffic
Copper/fiber uplinks
or patch field and
copper/fiber connectivity:
or patch field and
copper/fiber connectivity:
Enables troubleshooting of network connections and verification of
field terminations
field terminations
Included redundant
power supplies:
power supplies:
Minimize the risk of equipment failure for improved network reliability
Optional UPS:
Prevents rebooting of switch and loss of network during power outages
Optional PoE:
Provides 48Vdc power to the switch for PoE devices to simplify PoE
capable deployments and save money on the purchase of PoE injectors
capable deployments and save money on the purchase of PoE injectors
Isolation barrier:
Segregates higher line voltage from lower voltage switch for
increased safety
increased safety
Bonding provisions and
grounding bar:
grounding bar:
Ensure path to ground to protect personnel and equipment
Gland plate:
Allows quick and easy access to machine ingress points into enclosure
Detailed
installation guide:
installation guide:
Provides easy, repeatable design instructions assuring consistency and
saving time on the job-site
saving time on the job-site