Panduit Universal Network Zone System 사양 가이드

The Panduit Universal Network Zone System  

is designed to rapidly deploy an industrial Ethernet  

network between the enterprise and plant floor. 

Copper/fiber connectivity and power features  

minimize engineering and installation time resulting in 

faster implementation. The Universal Network Zone 

System provides usability similar to IT switches for 

industrial switches on the plant floor. This ensures 

that management and control of the network does 

not get in the way of making the most effective use of 

available network data.  

With UL Type 4/12/4X, IP66 rating and CE, the 

enclosures provide reliability and high performance, 

as an integral component of the end-to-end solution 

for Industrial Networks. 

The universal network zone system shall include copper/fiber uplinks 

and downlinks optimized for industrial Ethernet switches. System shall 

incorporate redundant power supplies and optional UPS and PoE 

power supply. The enclosure shall be UL 508A, UL Type 4/12/4X, 

IP66 rated and CE. A removable, pre-engineered back plate with DIN 

rails shall be incorporated in the enclosure. Pre-installed accessory 

side panels, fiber slack spool, and L rings shall be included for cable 

management. The door shall be secured with 3mm double bit or slotted 

latch drive feature. The door shall hinge on the right or left. Class 2 power 

circuits shall be pre-wired, labeled, and tested.  A barrier shall be present 

to isolate IT personnel from high voltage power circuit.

®  

PZNF1

PZNF2

PZNF3

PZNDVK

™

™

IAEBH6

IAEBH6S

CBXF6BL-AY

FLCDMCXAQY

CMDSAQLCBL

LC OM3 patch cord:  F92ERLNLNSNM001 
Opti-Core

FOPRX12Y

®

CDPP8RG

®

FDME8RG

®

CADIN1IG^

UTPSP3Y

®

CJ688TGIW

STP6X3IG 

®

CJS688TGY

™

Category 6, UTP: PUR6504BU-UY

Cisco^^ IE2000, IE3000, IE4000 series 
switch models
Allen-Bradley* Stratix** 5400, 5700, 8000, 8300 
series switch models 

^For standard colors other than International 

Gray, replace IG in part number with 

BL (Black), EI (Electric Ivory), IW (Off White), or 

WH (White).

^^Cisco is a registered trademark of Cisco 

Systems, Inc. and/or its affiliates in the United 

States and certain other countries.

*Rockwell Automation and Allen-Bradley are 

registered by Rockwell Automation in the Patent 

and Trademark Office of the United States.

**Stratix is a trademark of Rockwell Automation.

UL 508A Standard for Industrial Control Panels, UL Type 4/12 or 4X, 
IP66 Rated, CE

Z23U: 36.0"H x 24.0"W x 11.7"D (914mm x 610mm x 297mm)
Z22U: 24.0"H x 24.0"W x 11.7"D (610mm x 610mm x 297mm)

Enclosures: Gray, 14 gauge cold roll steel or 316 stainless steel 
Back panels: 14 gauge galvannealed steel or 304 stainless steel

Validated to 40°C ambient outside of enclosure or 60°C maximum within  
enclosure at up to 95% (non-condensing) humidity

Wall mount with optional outside-mount flange

Reduces time required for planning, designing, procurement, and  
installation, resulting in simpler specification and up to 75% 
faster implementation

Works with most DIN mount industrial Ethernet switches, providing 
design flexibility

Offer management and diagnostics from within IT and controls  
environments to optimize network traffic

Enables troubleshooting of network connections and verification of  
field terminations

Minimize the risk of equipment failure for improved network reliability 

Prevents rebooting of switch and loss of network during power outages 

Provides 48Vdc  power to the switch for PoE devices to simplify PoE 
capable deployments and save money on the purchase of PoE injectors

Segregates higher line voltage from lower voltage switch for  
increased safety

Ensure path to ground to protect personnel and equipment

Allows quick and easy access to machine ingress points into enclosure

Provides easy, repeatable design instructions assuring consistency and 
saving time on the job-site