Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Техническое Руководство

Installing and Upgrading Internal Modules in Cisco 2800 Series Routers

OL-5792-04

Replacing the Power Supply

Figure 48

Connecting a Secondary Power Cable in Cisco 2821 and Cisco 2851 Routers

Step 5

Install the bezel onto the front of the chassis as follows:

Engage the plastic tabs of the bezel into the slots in the chassis.

Slide the bezel until it is centered and tight against the chassis.

Step 6

If you are finished installing modules, install the cover on the router. See the

Secondary power conector, motherboard

Secondary power connector, power supply

135332