Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Техническое Руководство
46
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Replacing the Power Supply
Step 1
Insert the AC-input power supply into the chassis from the front.
Step 2
Install the two power supply retaining screws. Torque to 8 to10 in-lbf (0.9 to 1.1 N-m). See
.
Step 3
Connect the primary power supply cable to the power supply. Make sure that the locking feature on the
power supply end snaps into position. See
power supply end snaps into position. See
.
Figure 46
Primary Power Cable Connection in a Cisco 2821 or Cisco 2851 Router
.
Step 4
Install the bezel onto the front of the chassis as follows:
a.
Engage the plastic tabs of the bezel into the slots in the chassis.
b.
Slide the bezel until it is centered and tight against the chassis.
Step 5
If you are finished installing modules, install the cover on the router. See the
1
Power supply
2
Primary power cable connector
103705
1
2