Cisco CATALYST 4500 7 SLOT CHASSIS FAN NO POWER SUPPLY REDUNDANT SUPCAPABLE Техническое Руководство
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
3-25
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Chapter 3 Installing the Switch in a Rack
System Ground Connection Guidelines
Ensure that the grounding lug and the attached wire will not interfere with other
switch hardware or rack equipment.
switch hardware or rack equipment.
Step 7
Tighten the screws to secure the grounding lug to the grounding pad.
Step 8
Repeat steps
through
to prepare the other end of the grounding wire and
connect it to an appropriate grounding point at your site to ensure adequate earth
ground for the switch.
ground for the switch.
Step 9
Connect the power supply cords.
The switch comes on when the cords are connected and the power supply on/off
switch is on.
switch is on.
Note
This equipment is suitable for connection to intra-building wiring only.
Note
If you are using a DC power supply, the DC return connection to this system
should remain isolated from the system frame and chassis (DC-I).
should remain isolated from the system frame and chassis (DC-I).
This completes the installation of the Catalyst 4500 series switches.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/mod_inst
/0aspecs.htm#wp1003732
/0aspecs.htm#wp1003732