Alpine MRV-V500 Benutzeranleitung

 Be sure to add an in-line fuse with the battery lead as close as possible to the battery’s positive (+) terminal.

Before making connections, be sure to turn the 
power off to all audio components. Connect the 
battery lead from the amp directly to the positive 
(+) terminal of the vehicle’s battery with 
appropriate in-line vehicle’s fuse (see Battery Lead 
section). Do not connect this lead to the vehicle’s 
fuse block.

To prevent external noise from entering the 
audio system
•  Locate the unit and route the leads at least 10 cm 

(4”) away from the vehicle’s harness.

•  Keep the battery power leads as far away from 

other leads as possible.

•  Connect the ground lead securely to a bare metal 

spot (remove any paint or grease if necessary) of 
the vehicle’s chassis.

•  If you add an optional noise suppressor, connect 

it as far away from the unit as possible. Your 
Alpine dealer carries various noise suppressors, 
contact them for further information.

•  Your Alpine dealer knows best about noise 

prevention measures so consult your dealer for 
further information.