Q-Logic Q-Forms Kick Panel Enclosures Benutzeranleitung

This will position any area of the grill that hangs over to the
back bottom edge of the woofer surface where it will not be
visible when installed.  With the grill on the mounting
surface, mark the screw locations for the woofer.  Remove
the grill and align the screw locations with the the mount-
ing template to mark to cutout location.  Use a ruler and
pencil to mark the center point of the cutout by lining up
the mounting holes opposite one another.

Models with the tweeter ABOVE the woofer level;

Place the speaker grill or the speaker mounting template
on the woofer mounting surface.  The speaker grill will
most likely not fit completely against the tweeter area.
This will shift the center point for the woofer which may
result the grill hanging over the back and bottom edges of
the woofer area.  You may chose to check how the grill will
look in the vehicle but it is seldom seen when the installa-
tion is complete.  With the grill on the mounting surface,
mark the screw locations for the woofer.  Remove the grill
and align the screw locations with the the mounting tem-
plate to mark to cutout location.  Use a ruler and pencil to
mark the center point of the cutout by lining up the mount-
ing holes opposite one another.