Paradigm PW AMP Benutzeranleitung

1.  PRESS and HOLD the Wi-Fi button on the rear of your Paradigm Product for 4 seconds 

or until your hear a tone. The wireless LED will blink twice in continuous intervals.

2.  Now press the WPS button on your router. 

3.  Your Paradigm product is connected to your network when the wireless LED is solid.

1.  Connect your mobile device to the same wireless network that you want to connect 

your Paradigm product. 

2.  Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the 

Paradigm product connected to the your Wireless network and prompt you to name 

your device with one our pre-set names, or create your own name. 

1.  The app will automatically find your device and provide prompts for setup

2.  Touch the setup button on the screen

3.  Enter the password for your wireless network; the app will connect your device to your 

network. You will notice the Wireless Indicator on your Paradigm product will have 

changed from “blinking” to solid illumination. 

4.  Your device is now connected. You may re-name your device with one of our pre-set 

names, or create a name of your own choosing. 

1.  Unplug the Paradigm PW product from the power outlet. 

2.  Using the supplied ethernet cable, connect your Paradigm product to your router.

3.  Plug the Paradigm PW product into the wall outlet and press the power button; an 

audible tone will indicate power on. 

4.  10-seconds later the wireless indicator will start rapidly flashing for 20 seconds; this 

indicates your Paradigm product is booting up. 

5.  Once the Wireless Indicator switches off, the Paradigm product is connected to your 

network.

6.  Connect your Android device to the same wireless network that you want to connect 

your Paradigm product. 

7.  Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the 

Paradigm product connected to the your Wireless network and prompt you to name 

your device with one our pre-set names, or create your own name. 

1.  Activate the FREE DTS Play-Fi app on your Android device*. 

2.  Select your music source (personal music library or subscription based music, 

Internet Radio, or from select online must services such as Deezer, Songza, etc.  

(Visit paradigm.com to view a full list of available music services) 

1

3a

3b

3c

4

1.  Place your Paradigm product close to 

your router. You can move it to a new 

location later. 

2.  Plug-in your Paradigm product and 

press the POWER BUTTON.  A tone 

sounds confirming power on.  

3.  Within 10 seconds, the wireless LED will 

rapidly flash for 20 seconds, confirming 

your unit is booting up. 

4.  When the wireless LED pulses slowly, 

your Paradigm product is ready to 

connect to your wireless network. 

2

Visit paradigm.com to view a  

video of this setup and how to 

setup additional Paradigm PW 

products in other rooms.

Andrioid

Play-Fi

•  Music stored on device

•  Subscripton-based  

 music 

services

Up to 8 Speakers. Multiple 

simultaneous users 

09.18.15