Paradigm PW AMP Benutzeranleitung

1.  PRESS and HOLD the Wi-Fi button on the rear of your Paradigm Product for 4 seconds 

or until you hear a tone. The wireless LED will blink twice in continuous intervals.

2.  Now press the WPS button on your router. 

3.  Your Paradigm product is connected to your network when the wireless LED is solid.

1.  Connect your mobile device to the same wireless network that you want to connect 

your Paradigm product. 

2.  Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the 

Paradigm product connected to the your Wireless network and prompt you to name 

your device with one of our pre-set names, or create your own name. 

1.  The app will prompt you that a new device is ready for setup. Click on the screen to 

direct you to setup instructions. 

2.  Exit the app and access your settings on your iOS device

3.  Select Wi-Fi in your settings. Ensure that Wi-Fi is enabled on your device. Once the 

Wi-Fi is enabled, select the listed device with “Play-Fi” in the name. 

4.  Once your device is selected, exit the settings menu and re-enter the DTS Play-fi 

app. To choose your wireless network (you may be asked to enter your WIRELESS 

NETWORK PASSWORD). 

5.  Once your device is connected, you will notice that the Wireless Indicator on your 

Paradigm product will change from blinking to solid illumination 

6.  Your device is now connected. You may re-name your device with one of our pre-set 

names, or create your own name. 

1.  Unplug the Paradigm PW product from the power outlet. 

2.  Using the supplied ethernet cable, connect your Paradigm product to your router.

3.  Plug the Paradigm PW product into the wall outlet and press the power button; an 

audible tone will indicate power on. 

4.  10-seconds later the wireless indicator will start rapidly flashing for 20 seconds; this 

indicates your Paradigm product is booting up. 

5.  Once the Wireless Indicator switches off, the Paradigm product is connected to your 

network.

6.  Connect your mobile device to the same wireless network that you want to connect 

your Paradigm product. 

7.  Launch the DTS Play-Fi app. Upon launching the app, it will automatically detect the 

Paradigm product connected to the your Wireless network and prompt you to name 

your device with one of our pre-set names, or create your own name. 

1

3a

3b

3c

1.  Place your Paradigm product close to 

your router. You can move it to a new 

location later. 

2.  Plug-in your Paradigm product and 

press the POWER BUTTON.  A tone 

sounds confirming power on.  

3.  Within 10 seconds, the wireless LED will 

rapidly flash for 20 seconds, confirming 

your unit is booting up. 

4.  When the wireless LED pulses slowly, 

your Paradigm product is ready to 

connect to your wireless network. 

2

1.  Locate “Utilities” on your Apple computer. 

2.  Double-click “Airport Utility” app.

3.  On the toolbar at top of screen select 

“Base Station” and on the drop down 

menu select “Add WPS Device...”

4. Select your Play-Fi device from the list of 

found base stations.

Apple iOS

Play-Fi

•  iTunes stored on device

•  Subscripton-based music  

 services 

Up to 8 Speakers. Multiple 

simultaneous users stored 

on a home server 

Visit paradigm.com to view a  

video of this setup and how 

to setup additional Paradigm  

products in other rooms.

1.  Launch the DTS Play-Fi app.

2.  Select which Paradigm product you wish to be the primary; this prompt will only be displayed 

if multiple devices are on the network.

3.  The app will now indicate which is primary and which are the extended speakers.

4.  Select the album or song you wish to listen to.

5.  The app will now display the song selected.

6.  Pushing the DTS Play-Fi logo in the bottom hand corner of the any window will display the 

speakers menu.

7.  To configure speaker zones, select the 3 ‘blue bars’ on the top right hand side or swipe from 

left to right on the screen.

8.  To add another zone, simply select the zone you wish to configure.

9.  Select the speakers you wish to use in this zone.

10.If the speaker you wish to use is already in use you can take control by selecting the speaker 

from the list.

4

09.18.15