Sony E 10-18 mm f/ 4 OSS Lens Handbuch

4-30

SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)

2. In case of 2nd lens barrel assy replaced

Replace the 2nd lens barrel assy, flange back value of lens checked do not meet specification in middle range (focal length : 24 to 90 mm),

perform the following.

In case of positive (+) of flange back value, make the 2nd block adjustment washer thicker.

In case of negative (-) of flange back value, make the 2nd block adjustment washer thinner.

2ND BLOCK ADJUSTMENT WASHER

Part.No

t(mm)

3-292-495-01

0.05

Note:

2nd block adjustment washer that can be used for service is only thickness of 0.05 mm.

Except when you replace the 2nd lens barrel assy, the thickness do not be changed from shipping.

Fig.4-6-3

2nd Lens Barrel Assy

2nd Block Adjustment Washer

2nd Decoration Plate

1st Cam Ring
Decoration Plate

The changed portions from
Ver. 1.1 are shown in blue.