Schneider Electric Pty. Ltd. S1B15258 Benutzerhandbuch

4 of 20

5200UZI WHC2_5921 and 5200EZI WHC2_5922

USB ZB Interface and Ethernet ZB Interface User’s Manual

2.0 Safety and Product Handling Instructions

The ZigBee Interface units are for indoor use only. The units are designed for
use with a PC or with a Wiser Home Control. Please read and follow these safety
Cautions and Warnings.

Warning. Automatic Control Device

Equipment controlled by this device may start or stop at any time without
warning. Do not make wiring changes or adjustments to connected
appliances or lights without first disconnecting building power.

Warning. Not Intended for Medical Applications

Do not use this equipment for any application that is critical to the health
or life of any person. Do not place this equipment close to networked
medical devices, such as heart monitors.

Follow these guidelines to prevent damage to the interface unit:

• Do not attempt to disassemble the interface unit. There are no user serviceable

parts inside.

• Do not allow the unit to get wet.

• Do not allow metal objects to contact the pins inside the USB or Ethernet

connector.

• Keep the unit away from dust, direct sunlight, heat and moisture.

• Do not force the USB interface unit into the USB slot.

• Do not allow children to play with the unit.

When operating the interface units keep the following in mind:

• Pressing and holding the USB interface’s reset button or the Ethernet interface

unit’s SETUP button erases the current ZigBee configuration.

• Do not disconnect or remove power from the unit when the orange light is

flashing rapidly(a firmware load is in progress).