Bently Nevada Inc. 18531001 Benutzerhandbuch
Section 6 - Configuring Essential Insight.mesh
41
Collect Channel 1 static…
Re-charge
Collect Channel 2 static…
Re-charge
Collect Channel 3 static…
Re-charge
Collect Channel 4 static…
Re-charge
With the assumption that the re-charge time is
approximately 15 minutes, you can see that with a
scheduled collection time of 2 hours, the time
difference from the first to the last channel could be
45 minutes.
approximately 15 minutes, you can see that with a
scheduled collection time of 2 hours, the time
difference from the first to the last channel could be
45 minutes.
Further, transducer type, integration, low frequency
high pass filter corners, and high resolution
waveforms will result in longer collection periods that
consume more power and result in the battery taking
longer to recharge. If more power is consumed it
takes more time to recharge before the next
measurement can be made.
high pass filter corners, and high resolution
waveforms will result in longer collection periods that
consume more power and result in the battery taking
longer to recharge. If more power is consumed it
takes more time to recharge before the next
measurement can be made.
15 min static sample interval should be used as a
temporary, bad actor analysis tool. Only one
channel should be set to static data every 15 min to
reduce delayed data collection on other channels.
temporary, bad actor analysis tool. Only one
channel should be set to static data every 15 min to
reduce delayed data collection on other channels.
High-resolution waveforms should only be used as a
temporary, analysis tool during trouble shooting. For
example, when a specific bearing defect is trying to
be identified.
temporary, analysis tool during trouble shooting. For
example, when a specific bearing defect is trying to
be identified.
The recommended configuration is:
Channel 1 Static - 2 hours
Channel 2 Static - 2 hours