Technologies Humanware Inc. APBT320 Benutzerhandbuch
BrailleNote Apex QT User Guide
11-263
11.8.2
Receiving incoming E-mail.
The following steps are required to read your incoming e-mail.
1. Select KeyMail by pressing FUNCTION with 8.
2. KeySoft displays
"KeyMail Menu.” Select "Read E-mail" from the KeyMail menu.
3. KeySoft prompts
"Connect using which configuration? Press ENTER for (name).” where
(name) is the name of a connection configuration you have set up in the Connectivity menu. To
use the offered configuration, just press ENTER. If the correct configuration was not prompted,
press SPACE repeatedly to find the required configuration. When you have found it,
press ENTER.
use the offered configuration, just press ENTER. If the correct configuration was not prompted,
press SPACE repeatedly to find the required configuration. When you have found it,
press ENTER.
4. KeySoft prompts:
"Use which e-mail account? Press ENTER for (account)" To select the
offered e-mail account, press ENTER, otherwise press SPACE repeatedly to find the required
account. When you have found it, press ENTER.
account. When you have found it, press ENTER.
Note: If you typically use the same e-mail account and the same connection configuration every
time, you can simply cut these two prompts short by pressing ENTER, because the offered
option is always the last option used.
time, you can simply cut these two prompts short by pressing ENTER, because the offered
option is always the last option used.
5. If using a dial-up modem to access your e-mail, read this. If not, skip to the next step. KeySoft
displays the message
“dialing,” and you should hear the dialing process followed by whistling
noises as your modem connects with the modem at your Service Provider. Before the sequence
of messages listed in the next step, you will first hear these:
of messages listed in the next step, you will first hear these:
Dialing;
Connected;
Logging On;
Logon Successful;
Connected;
...and at the end of the sequence below, you will get this message:
Remain connected to the modem? (Press Y or N)
6. KeySoft reports the progress of the mail checking sequence by displaying the appropriate
message as each significant stage of the operation is completed. The typical sequence of
messages, assuming you have one new message to receive and no outgoing e-mail to send, is:
messages, assuming you have one new message to receive and no outgoing e-mail to send, is:
There is 1 e-mail on Server;
Checking for new messages;
There is 1 new e-mail;
Receiving 1;
There is no e-mail to send.