F.I.T CO. LTD. FIT004 Benutzerhandbuch
S3 Graphics Video Wall Driver Package
User Guide
SG199-B.1 11/12/2010
Page
25
[T4] The monitors are lit up, but the sequence of the monitors is not correct.
Step 1: If the image on the screen appears to be fragmented, check the sequence of the Cores. (For
more details, refer to section:
Appendix 1: Video Wall Layout Configuration Diagrams
).
For example:
The following diagram on the left shows a 2 x 3 topology with an incorrect image. We can see
that the images on the second row and the third row are reversed.
that the images on the second row and the third row are reversed.
After exchanging the connection of the second Core and the third Core, the complete image is
correct as shown in the diagram on the right.
correct as shown in the diagram on the right.
Broken Image
Correct Image
Step 2: Check the connection of each Core.
For example:
The following diagram on the left shows a 2 x 3 topology with an incorrect image, On the first row,
the second monitor and the third monitor are reversed. After exchanging the connection of the
second monitor and the third monitor on the first row, the image is correct as shown in the
diagram on the right.
the second monitor and the third monitor are reversed. After exchanging the connection of the
second monitor and the third monitor on the first row, the image is correct as shown in the
diagram on the right.
Broken Image
Correct Image
[T5] The image appears to be distorted at the edge of each display.
Step 1: Adjust the bezel size and position using the utility (For more details, refer to section:
Configure
the display bezel width and height
and section:
Configure the display bezel position.