Essence Security International ltd. ES7000EG Benutzerhandbuch
Operation
42
EverGuard Control Panel
13.
When processing is complete a message appears stating that the record
updated successfully. Click OK.
updated successfully. Click OK.
14.
The Installation – User Screen reappears with the new user highlighted.
15.
Click Back to return to the Installation Screen.
To Edit a User:
1.
On the Installation screen, roll the trackball to the User Settings
icon.
icon.
2.
Click. The Installation – Users screen appears.
3.
Roll to the line item to be edited and click. A popup menu appears.
4.
Roll to Edit and click. The Edit User screen appears.
5.
Modify the parameters as in the procedure for adding a new User (follow
the procedure for adding new user as outlined above).
the procedure for adding new user as outlined above).
To delete a User:
1. On the Installation screen, roll the trackball to the User
icon.
2. Click. The Installation – Users screen appears.
3. Roll to the line item to be deleted and click. A popup menu appears.
4. Do one of the following:
Select Delete.
Select Edit. The Editing Users screen appears. Click Delete.
5. You are prompted to confirm the delete. Click Delete. You are returned to the
Installation – Users screen. The device is deleted.
3.3.2
ESI-CMS Application
To initially connect to the ES7000EG control panel:
For the initial configuration, connect to the control panel via either a direct
connection or a wireless connection.
connection or a wireless connection.
For a direct connection, use a standard mini-USB to serial cable to connect
between the control panel and the computer or laptop (not provided).
between the control panel and the computer or laptop (not provided).
For remote communication use a GSM or GPRS connection.
Once the communication is established between the ESI-CMS software and the
ES7000EG control panel, the control panel’s existing parameters are uploaded
to the ESI-CMS software in the computer. This enables changes to be made
to the configurable parameters that are then downloaded back to the control
panel.
to the ESI-CMS software in the computer. This enables changes to be made
to the configurable parameters that are then downloaded back to the control
panel.
1. Initialize the ESI-CMS application. The Connect dialog box appears.