Essence Security International ltd. ES7000EG Benutzerhandbuch
Operation
EverGuard Control Panel
43
Figure 16: Connect Screen
2. Leave the Username and Password fields empty.
3. Under Protocol, select the radio button for:
Upload
-
to make either a direct and remote connection to the ES7000EG
control panel in order to change configuration
Remote boot - to make a remote connection to a deployed ES7000EG
control in order to update firmware
4. Open the Connect Link dropdown menu, which opens a list of available ports
for different communication channels. Select the desired option.
5. If a GSM connection is selected, type in the appropriate telephone number in
the Phone Number field.
6. Click Connect. Loading progress information appears in the message section
at the bottom and the Panel Info dialog box is displayed.
Note: When making a direct connection, if a timeout occurs and the
connection is not established, or if you need to exit and reenter the
ESI-CMS, you must unplug the mini USB from the control panel and
then reconnect it. The connection can then be reestablished
connection is not established, or if you need to exit and reenter the
ESI-CMS, you must unplug the mini USB from the control panel and
then reconnect it. The connection can then be reestablished
To Connect to a Control Panel if the application is already
running
running
1. From the Link menu select Connect or
Click
. on the toolbar. The Connect dialog box appears.
2. Follow the initial connection instructions as above.