Edgecore Networks Corporation SMCWBR14SN5 Benutzerhandbuch
C
HAPTER
4
| Configuring the Router
Access Control
– 89 –
◆
UDP-FLOOD Packets Threshold (5~3600) - The default value is
500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD
Packets number is beyond the set value, the Router will startup the
blocking function immediately.
◆
Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the
TCP-SYN-FLOOD Attack Filtering.
◆
TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value
is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-
FLOOD Packets numbers is beyond the set value, the Router will startup
the blocking function immediately.
◆
Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping
Packet From WAN Port. The default setting is disabled. If enabled, the
ping packet from the Internet cannot access the Router.
◆
Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping
Packet From LAN Port. The default setting is disabled. If enabled, the
ping packet from LAN cannot access the Router. This function can be
used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by
blocking.
A
CCESS
C
ONTROL
There are five submenus under the Access Control menu as shown in
: Rule, Host, Target, Schedule, and Parental Control. Click any of
them, and you will be able to configure the corresponding function.
Figure 87: Access Control
R
ULE
Select Access Control->Rule from the menu; you can view and set
access control rules in the screen, as shown in