Qiaoxing Telecom Industry Co. Ltd. TC-STC590-595 Benutzerhandbuch
Placing Calls
1. Press
the
Talk button, the Call Timer starts to
count.
2. Wait until you hear a dial tone and then dial the
phone number.
3. When you have finished your call, press the Talk
button again or place the HANDSET on the BASE
UNIT.
UNIT.
OR
1. Dial the phone number.
2. Press
2. Press
the
Talk button. The number displayed will be dialed.
3. When you have finished with your call, press the Talk button again or place the
HANDSET on the BASE UNIT.
Redial Feature
1. If you get a busy tone, press the Talk button or
1. If you get a busy tone, press the Talk button or
place the HANDSET on the BASE UNIT to
hang up.
hang up.
2. Later, press the Talk button again.
3. Listen for a dial tone.
4. Press the Re/Pa/Save button. This will
3. Listen for a dial tone.
4. Press the Re/Pa/Save button. This will
automatically redial the last telephone number
you called.
you called.
5. When you have finished with your call, press
the Talk button again or place the HANDSET on
the BASE UNIT.
the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to
warn you that the background noise level is too high for proper communication
between the HANDSET and the BASE UNIT. When you hear this sound, you
should move closer to the BASE UNIT to reduce the noise level. Otherwise, the
call will automatically cut off.
warn you that the background noise level is too high for proper communication
between the HANDSET and the BASE UNIT. When you hear this sound, you
should move closer to the BASE UNIT to reduce the noise level. Otherwise, the
call will automatically cut off.
Cordless Telephone Operation
12