Qiaoxing Telecom Industry Co. Ltd. TC-STC590-595 Manual Do Utilizador

Placing Calls

1. Press

the

Talk button, the Call Timer starts to

count.

2. Wait until you hear a dial tone and then dial the

phone number.

3. When you have finished your call, press the Talk

button again or place the HANDSET on the BASE
UNIT.

1. Dial the phone number.
2. Press

the

Talk button. The number displayed will be dialed.

3. When you have finished with your call, press the Talk button again or place the

HANDSET on the BASE UNIT.

Redial Feature
1. If you get a busy tone, press the Talk button or

place the HANDSET on the BASE UNIT to
hang up.

2.  Later, press the Talk button again.
3.  Listen for a dial tone.
4. Press the Re/Pa/Save  button. This will

automatically redial the last telephone number
you called.

5. When you have finished with your call, press

the Talk button again or place the HANDSET on
the BASE UNIT.

NOTE:

If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to
warn you that the background noise level is too high for proper communication
between the HANDSET and the BASE UNIT. When you hear this sound, you
should move closer to the BASE UNIT to reduce the noise level. Otherwise, the
call will automatically cut off.

Cordless Telephone Operation