Diffraction Limited MD1 Benutzerhandbuch
MaxDome
24
Slaving Setup
The ASCOM Dome Control Panel can be used to slave the dome to your
telescope.
Open the ASCOM Dome Control Panel, as described under Dome Setup. Click
the Setup button, and click Select Scope.
telescope.
Open the ASCOM Dome Control Panel, as described under Dome Setup. Click
the Setup button, and click Select Scope.
Select the desired telescope, and then click Properties... to configure it. When
you are done click OK.
Now you must set up some dome parameters. This only need be done once.
•
Enter your Latitude, in degrees. North is positive. This should be a
decimal number, e.g. 45.5.
decimal number, e.g. 45.5.