WABCO GmbH OPTITIRE Benutzerhandbuch
6
OPTITIRE
Installation
34
6
Installation
In this chapter, you will learn how the OPTITIRE is installed your vehicle.
Observe all safety instructions when carrying out assembly work on the vehicle.
Observe all safety instructions when carrying out assembly work on the vehicle.
WARNING
Regulations / Instructions
– Observe the occupational health and safety regulations of the respective coun-
try, the workshop as well as the vehicle manufacturer's instructions.
WARNING
Rolling away of the vehicle
Vehicles not secured may roll away during the assembly. This might lead to severe
injuries or even death.
– Secure the vehicle against rolling away before carrying out work on the vehicle.
injuries or even death.
– Secure the vehicle against rolling away before carrying out work on the vehicle.
WARNING
Danger to health due to dust
Dust that are dangerous to health are generated when the rim is cleaned using
compressed air.
– For this purpose, do not clean the rims using compressed air.
compressed air.
– For this purpose, do not clean the rims using compressed air.
WARNING
Loose wheel nuts
Loose wheel nuts may lead to accidents when driving on roads.
– Wheel nuts must be tightened with torque specified by vehicle manufacturer.
– Check the tightness of the wheel nuts after 500 km.
– Wheel nuts must be tightened with torque specified by vehicle manufacturer.
– Check the tightness of the wheel nuts after 500 km.