BMI Technologies Inc. RFVI Benutzerhandbuch

G FORCE PLUS RF Instruction Manual 

 

 

Apr/08

Doc #RF1 Rev.9 

3.  Hold the Data Logger parallel to the face of the Vehicle Interface, making sure they are within 1” of 

each other.  

 

4.  Listen for a single beep from the Vehicle Interface.  This indicates the Data Logger has been 

recognized. 

5.  Refer to instructions for individual functions to learn when the Vehicle Interface / Data Logger 

interaction is complete for that function. 

6.  When the interaction is complete, remove the Data Logger from the Vehicle Interface and read the 

Vehicle Interface display for further information. 

7.  If the Vehicle Interface fails to recognize the Data Logger, remove it from the Vehicle Interface by 

approximately 12” and retry. 

 
 

 
1.  Hold the Card parallel to the top of the Software Interface, making sure they are within 1” of each 

other (or lay the Card on the Software Interface). 

2.  Initiate the interaction between the Software Interface and Card by selecting the desired task from the 

Fleet Manager Software. 

3.  Watch the Software for progress of the interaction. 

4.  Click the [OK] button to confirm completion of the interaction when prompted by the Software. 

 

5.  Remove the Card from the Software Interface.