BMI Technologies Inc. RFVI Benutzerhandbuch

DRAFT G FORCE PLUS RF Instruction Manual 

 

 

Doc #RF1 Rev.9 

Apr/08 

6.  If the interaction fails, remove the Card from the Software Interface by approximately 12” and retry. 
 
 

 
1.  Prepare the Data Logger for the interaction by selecting the desired Data Logger function. 

2.  Hold the Data Logger parallel to the top of the Software Interface, making sure they are within 1” of 

each other (or lay the Data Logger on the Software Interface). 

 

3.  Initiate the interaction between the Software Interface and Data Logger by selecting the desired task 

from the Fleet Manager Software. 

4.  Watch the Software for progress of the interaction. 

5.  Click the [OK] button to confirm completion of the interaction when prompted by the Software. 

6.  Remove the Data Logger from the Software Interface. 

7.  If the interaction fails, remove the Data Logger from the Software Interface by approximately 12” and 

retry.