L-3 Communications Aydin Corporation 6000-8501900 Benutzerhandbuch

P

AGE

 4 • GSM T

ERMINAL

 U

SER

 G

UIDE

•  Install the antenna onto the threaded 

connector on the side of the GSM Terminal.

•  Tighten the connector by hand only.
•  Turn the antenna to a vertical or near-vertical 

orientation.

•  Locate the battery door on the top rear of 

the subscriber unit and remove it by pressing 

in and then up on the arrows.  The door will 

“hinge” open for removal (Figure 7).

 

•  Press the battery (velcro-tape side down) to 

hold the battery in place within the case.

•  Connect the socket of the battery wire to the 

plug located inside the battery compartment.      

Note: The included battery may be partially 

charged.  The terminal must still be connected