L-3 Communications Aydin Corporation 6000-8501900 Benutzerhandbuch
P
AGE
24 • GSM T
ERMINAL
U
SER
G
UIDE
CLI Protocol Selection
The default GSM Terminal setting for Calling Line
Identification (CLI) presentation protocol for Caller
ID display devices is the ETSI V.23 standard. User
can change the CLI presentation protocol setting
to Bellcore or ETSI DTMF by using the following
dialing sequences:
To choose Bellcore, enter the following sequence:
#* 24 * 1
To choose ETSI DTMF, enter the following
sequence:
#* 24 * 2
To reset back to ETSI V.23, enter the following
sequence:
#* 24 * 0
i Due to the limitation of ETSI DTMF standard
only the phone number of the calling party will be
displayed on DTMF-type Caller ID devices if ETSI
DTMF protocol is selected. Other information
display capabilities, such as SMS messaging, RSSI
display and call metering information will not be
available using DTMF-type Caller ID devices.
System Time
You can set the system time of the GSM Terminal.
This allows the incoming call time to be presented to
Caller ID devices connected to the GSM Terminal
along with the number of the incoming call. In the
case when the Terminal is powered down, you will
need to reset the time. If the time is not set, the
Terminal will not present the time with the Caller
ID message. In this case, time presentation is Caller
ID box dependant.