TP-Link Technologies Co. Ltd. C20I Benutzerhandbuch

 

- 40 - 

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected 

Setup PIN number. 

Step 1:  Keep the default WPS status as Enabled and click the Add device button in Figure 

4-16, then Figure 4-19 will appear.   

Figure 4-19 Add A New Device 

Step 2:  Enter the PIN number from the client device in the field on the WPS screen above. Then 

click Connect button. 

Step 3:  “Connect successfully” will appear on the screen of Figure 4-19, which means the 

client device has successfully connected to the router. 

Use this method if your client device asks for the router’s PIN number.   

Step 1:  On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup 

screen, shown in Figure 4-16. 

Step 2:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected 

Setup process.   

Step 3:  When the WPS LED is on, the client device has successfully connected to the router.   

)

 

1)  The WPS LED on the router will light green for five minutes if the device has been 
successfully added to the network. 
2)  The WPS function cannot be configured if the Wireless Function of the router is disabled. 
Please make sure the Wireless Function is enabled before configuring the WPS. 

Choose menu “Wireless 2.4GHz  → Wireless Security”, you can configure the security settings 
of your wireless network. There are five wireless security modes supported by the router: 
WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, and WEP.