TP-Link Technologies Co. Ltd. MW8901G Benutzerhandbuch

41

)

If you want to make the rule take effect, please select Yes to active the rule. 

Step 3:  Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port 

Number” in the corresponding field. 

Step 4:  Select the Protocol as “TCP” and select the Unmatched rule as “Next”.

Step 5:  Finally, click the SAVE to save the entry.

Step 6:  Go to Step 2 to configure the next two rules: Block E-mail received by the IP address 

192.168.1.7 on your local network; Make the PC with IP address 192.168.1.8 unable to 

visit the website of IP address 202.96.134.12.

)

After you complete the IP filter rules for the example, the Filter list will show as follows. You can 

enter the IP / MAC Filter Set Index to view the information about the rule. 

Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry. 

Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, 

and then click the DELETE button to delete the entry.