TP-Link Technologies Co. Ltd. MW8901G Benutzerhandbuch

43

Select the “MAC” as the Rule Type on the Filter screen (show in Figure 4-33). 

, Then you can configure the specific rule for the example. 

Step 2:  Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then 

select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule. 

)

If you want to make the rule take effect, please select Yes to active the rule. 

Step 3:  Enter the “MAC Address” and select the Unmatched rule as “Next”. 

Step 4:  Finally, click the SAVE to save the entry.

Step 5:  Go to Step 2 to configure the next rule: Block the PC with MAC address 

00-0A-EB-00-07-5F to access the Internet.

)

After you complete the MAC filter rules for the example, the Filter list will show as follows. You can 

enter the IP / MAC Filter Set Index to view the information about the rule. 

Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry. 

Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, 

and then click the DELETE button to delete the entry. 

Select Application Filter as the Filter type (shown in Figure 4-34), and then you can configure 

the filter rules based on application.