KING 433RA Benutzerhandbuch

Page 6

The VuQube can be set up to automatically switch between the following satellites by storing them
in memory and activating the automatic satellite switching feature.  Once active, the antenna will
automatically switch satellites as necessary when changing channels with your receiver’s remote

control.

DISH HD Alternate with Locals:  61.5, 110 and 119 (use in eastern US)

DISH HD Western Arc with Locals:  110, 119, and 129 (use in western US)

Using the automatic satellite switching feature requires a 3 step configuration process.

Step 1: Run a check switch procedure to clear the memory of the receiver.

Step 2: Lock onto and store each satellite’s location in the VuQube’s memory.

Step 3: Run a check switch procedure to enable automatic switching in the receiver.

Note:  After running the check switch in step 3 you will not have to run it again (see gray box on page 10 for

exceptions when you will have to run the check switch again).