Arcadian Networks Inc. V390I Benutzerhandbuch
V290iA User Guide
49
5
Maintenance
The V390i is designed for high reliability and requires only limited maintenance. This
chapter describes the behavior of the V390i LEDs during normal operation. In the event
of device functionality issues, refer to Troubleshooting on page 53.
chapter describes the behavior of the V390i LEDs during normal operation. In the event
of device functionality issues, refer to Troubleshooting on page 53.
Interface Panel LEDs
The following figure shows the LEDs on the V390i’s interface panel. These LEDs
provide performance indications for the V390i.
provide performance indications for the V390i.
Figure 29: V390i Interface Panel LEDs
The following table describes the LEDs and their standard behavior and functions.
Table 5: V390i LEDs
LED
Function
Power Status
Amber when power is supplied to both the V384+A and the Cisco
router.
If the Power LED behaves differently, this indicates some kind of
power failure. Refer to Power Failure Indications Provided by the
Power LED on page 55 for details.
router.
If the Power LED behaves differently, this indicates some kind of
power failure. Refer to Power Failure Indications Provided by the
Power LED on page 55 for details.
Router OK
Blinks green during router boot-up sequence. Green when the router is
operational.
operational.
WiFi Ethernet (E)
Blinks green when transmitting/receiving Ethernet packets.
Green when Ethernet link operational.
WiFi RF (RF)
Blinks green when transmitting/receiving radio packets.
Green when RF link is operational.