Arcadian Networks Inc. V390I Benutzerhandbuch
5 Maintenance
50
V290iA User Guide
LED
Function
WiFi Status (S)
Blinks green when no WiFi devices are associated with the WiFi
interface.
interface.
Green when at least one device is associated with the WiFi
interface.
interface.
UHF
Ethernet (E)
Ethernet (E)
On when the Ethernet link is operational.
Off when the Ethernet link is not operational.
Flashing when data is being transmitted/received.
UHF Status (S)
On when the V384+A is registered.
Off when the V384+A is not registered.
UHF RF Link (RF)
When Status LED is Off:
On when the downstream link is operational.
Off when the modem has not yet begun downstream
acquisition, the downstream link is idle, or there is a problem
with data reception.
acquisition, the downstream link is idle, or there is a problem
with data reception.
Flashing when the downstream link is being acquired.
When Status LED is On:
Flashing when data is transferring in either in the Upstream or
Downstream direction.
Downstream direction.
Link/Act (for each
Serial port)
Serial port)
Green when the serial port is operational.
Blinks red when packets are transmitted or received.
Link (for each
Ethernet port)
Ethernet port)
Green when the Ethernet port is connected to a device.
Act (for each
Ethernet port)
Ethernet port)
Blinks green when packets are transmitted or received.
WiFi LEDs Operation
As shown in Figure 29, the V390i interface panel includes three WiFi LEDs:
Ethernet (E), Status (S), and Radio (RF). These LEDs are used in combination to
determine overall V390i device status.
Ethernet (E), Status (S), and Radio (RF). These LEDs are used in combination to
determine overall V390i device status.
If any of the WiFi LEDs is Red or Amber (steady or blinking) this indicates an
initialization state, warning or a failure state. Refer to Device Status Indications
Provided by WiFi LEDs on page 55 for details.
initialization state, warning or a failure state. Refer to Device Status Indications
Provided by WiFi LEDs on page 55 for details.