Arcadian Networks Inc. V390I Benutzerhandbuch
V290iA User Guide
53
6
Troubleshooting
This chapter includes:
A list of common issues and the troubleshooting actions to be taken when they are
encountered. The issues are composed of two types: issues that must be dealt with
on-site, and issues that can be dealt with remotely.
encountered. The issues are composed of two types: issues that must be dealt with
on-site, and issues that can be dealt with remotely.
The on-site troubleshooting section includes also a list of device status indications,
as provided by the state of the WiFi interface panel LEDs.
as provided by the state of the WiFi interface panel LEDs.
Instructions for remote and local Telnet access to the V390i.
;
For a description of the V390i LEDs, refer to Chapter 2, Interface Panel LEDs on
page 49.
On-site Troubleshooting Issues
Table 6: On-Site Troubleshooting Issues
Issue
Actions
All LEDs are OFF
Check that the power cable is properly connected.
Check the power at the cable end connecting to the V390.
If it is OK:
If it is OK:
Check whether there is a problem with your electrical
system.
system.
Otherwise, replace the V390i.
Power is not stable (power LED
is not steady)
is not steady)
Verify that the power supply in use can deliver 5A at the
required voltage and temperature range.
required voltage and temperature range.
If power supply cannot deliver it – there is a problem
with your electrical system.
with your electrical system.
Otherwise, replace the V390i.