Intel P4304BTSSFCN Benutzerhandbuch
Monthly Specification Update
Enterprise Platforms and Services Marketing
11
26. The NMI button on front panel does not work as expected
Problem
When pressing the NMI button on the front panel the system does not generate
an Non-Maskable Interrupt.
an Non-Maskable Interrupt.
Implication
Cannot create NMI interrupt through the NMI button on front panel.
Status
Fixed in BIOS Rev.35
Workaround None.
27. Consistency Check in S1200BTL/S1200BTS motherboard’s ESRT2
OpROM Configuration Utility returns error message
Problem Consistency Check in S1200BTL/S1200BTS motherboard’s ESRT2 OpROM
Configuration Utility returns error message
Implication
The screen may pop up message “Error In Reading Sectors To Drive0 !
Proceed Anyway (Y/N)?”. If Y is pressed, the screen may pop up the same
message after a while. The Consistency Check may not complete
successfully. User has to abort the Consistency Check.
Proceed Anyway (Y/N)?”. If Y is pressed, the screen may pop up the same
message after a while. The Consistency Check may not complete
successfully. User has to abort the Consistency Check.
Status
It is under investigation of why ESRT2 OpROM Configuration Utility has such a
limitation.
limitation.
Workaround
In the operating system environment, use Intel
®
RAID Web Console 2 to
implement Consistency Check. The failure to complete Consistency Check
during ESRT2 OpROM Configuration Utility doesn’t impact normal usage under
operating system environment.
during ESRT2 OpROM Configuration Utility doesn’t impact normal usage under
operating system environment.
28. There is no driver for Intel® 82579 network card on VMWare ESXi* 5.0,
VMWare ESXi* 4.1 Update 1 and VMWare* ESX 4.1 Update 1
Problem
There is no driver for Intel
®
82579 network card on VMWare ESXi* 5.0,
VMWare ESXi* 4.1 Update 1 and VMWare* ESX 4.1 Update 1
.
Implication
Intel
®
82579 network card can not be recoginized under VMWare ESXi* 5.0,
VMWare ESXi* 4.1 Update 1 and VMWare* ESX 4.1 Update 1
Status
NA.
Workaround None.
29. The boot time is 10 mins if using 4k section HDDs
Problem
Using the 4K section HDDs in USB port and set it as non boot device, it needs
10 minute to pass through. It is should be in less than one minutes.
10 minute to pass through. It is should be in less than one minutes.
.