Winmate Inc. 1200 Benutzerhandbuch
ACCESS POINT
47
Problem 6:
I forgot my password
Answer: If you have forgotten your password, then you need to reset your AP so it
can restore factory settings and therefore restore default password as well. The default
password is “public”. Refer to
can restore factory settings and therefore restore default password as well. The default
password is “public”. Refer to
resetting the access point
section to see how to reset
and reconfigure your AP.
Problem 7:
Problem 7:
I receive this error message when I try to set my AP to “Access Point
Client” mode.
Solution: This error is caused by the fact that your AP cannot detect other APs within
its range. Make sure other AP is powered on and connected. Then try again.
Problem 8:
I received this error message.
Some settings are restricted and can only be modified by administrators. If you want
to change these settings, then you have to log in as administrator rather than user.
Problem 9: I receive “Get Configuration failed” error message.
Answer: This problem is usually caused by the connection between you and the
access point has been broken. Try to reconnect to the access point. If reconnection
fails, then check the network setting and also if the AP is powered on and connected
to the network.